Bushranger® Tree Trunk Protector is engineered and manufactured to the highest quality standards. All Bushranger straps are Australian tested both in NATA accredited lab and 4WD field test conditions. Tree Trunk Protector: In a vehicle recovery situation, the use of wrapping cable, rope or chain around a tree, causes damage to both your recovery equipment and the tree. The Tree Trunk Protector will provide a secure recovery attachment point while protecting the tree. Reinforced Protection | Added protective eyelets to ensure maximum strength when used with shackles and hooks. Strap Usage Recording Tags | Located with the compliance tags, the usage tags allow you to record and track the number of times the strap is used to help identify fatigue and age of the strap. Wrap-it Strap | Easy storage wrap it strap, stitched to the tree trunk protector, so it is ready to roll up and use any time. Quality | manufactured from a high-quality polyester material & reinforced stitching.

Tow hooks are basic tools you can attach to your vehicle so you can pull it safely. Tow hooks are used for towing vehicles, and using one or several of them is simply a much better choice than the alternative – hooking your tow chains or straps right on the wheel axles, the suspension or the bumpers.

The Bushranger® Bow Shackle available in two practical sizes for all your recovery needs. Size available: 3.25, 4.75 tonne.

Bushranger REVO Winch is packed with many features. Including high-quality construction, low current draw, 4 stage oversized gearing with fast line speeds and an advanced proportional friction braking system that will reliably hold 100% of the rated load with no slippage. The zero drag braking system allows for fast no load line speeds, making unspooling the rope a breeze. No more pulling against the friction of traditional winch braking systems uses the power of the winch to do the unspooling for you with no concern of brake drag causing unnecessary wear and heat build-up. A fully sealed motor and gearbox (IP67 rated) gives maximum protection from water, dust and debris. Meaning the winch is ready for anything you can throw at it. Winch weight fitted 33kg.

The Bushranger® Dirt Blocka Mat is designed with deep edges to capture all the debris that is brought into the vehicle, from sand, dirt, mud, snow, even water can be contained within the mats. Made from a solid rubber construction that retains integrity and shape and easy to clean. A 5cm high perimeter ridge to keep debris enclosed from your interior material. Underside of mat features ribs to prevent mat slippage. Generous size to suit even the largest 4×4, they can also be trimmed to suit your foot well. Available in black. 5 Year warranty.

The Bushranger® Dirt Blocka Mats designed with deep edges to capture all the debris that is brought into the vehicle, from sand, dirt, mud, snow, even water can be contained within the mats. Made from a solid rubber construction that retains integrity and shape and easy to clean. A 5cm high perimeter ridge to keep debris enclosed from your interior material. Underside of mat features ribs to prevent mat slippage. Generous size to suit even the largest 4×4, they can also be trimmed to suit your foot well. Available in black. 5 Year warranty.

The Bushranger® Dirt Blocka Mats designed with deep edges to capture all the debris that is brought into the vehicle, from sand, dirt, mud, snow, even water can be contained within the mats. Made from a solid rubber construction that retains integrity and shape and easy to clean. A 5cm high perimeter ridge to keep debris enclosed from your interior material. Underside of mat features ribs to prevent mat slippage. Generous size to suit even the largest 4×4, they can also be trimmed to suit your foot well. Available in black. 5 Year warranty.

The Bushranger® Moulded Mud Flaps protects your vehicle, caravan or trailer against stones, mud and other debris. Easy to install and clean. UV stable protection. 5 year warranty. Small | 260mm x 360mm

The Bushranger® X Trax II engineered for maximum strength and traction in terrain such as sand, snow and mud. Designed to bend, flex and grip to the tyre treads as much as possible. Made from heavy duty rubber, and galvanised steel cables and fittings, at 1.4 metres long, and 30cm wide, these are sold in pairs in a durable car wrap. X Trax II can also be used for the following applications: Folded us used as a leveller for caravans, a shower mat, a dampener, extended tracks etc.

The Bushranger® Recovery Hitch is the number one recovery item. The recovery hitch slides into a 50mm towbar receiver and locks into place using the pull pin and clip. The recovery hitch has twin slotted holes so it can be mounted horizontal or vertically to suit the recover situation. It comes with a with a 4.75 tonne bow shackle and available in a standard length and extended.

The Bushranger® Diggar Shovel is a simple, compact tool, essential on the open road. Suitable for digging out of trouble, camp fire pits, or even the outhouse. Strong and durable designed, 2mm thick heat treated blade with 36mm multi-core fiberglass handle with rubber grips. Compact 3 piece design, breaks down into 3 pieces (max 760mm) that stores away neatly when not in use in a handy carry bag. Multi-Use Long handle shovel and D-Handle spade.

The Bushranger® Bow Shackle available in two practical sizes for all your recovery needs.

The Bushranger Night Hawk VLI Series Wiring System has been pushed to the edge by developing the first dedicated auxiliary light wiring system to incorporate relay free switching and brightness control functionality. What does this mean? Simpler wiring, easier installation, more user control and greater reliability over the traditional plug and play wiring loom. The commonly used automotive 12V relay is removed entirely and replaced with modern transistor switching, which is built into the light and the control module. Each light is powered directly from the battery, rather than through a relay, meaning there are no power restrictions for the wiring system, which is a common limitation with traditional relay-based wiring looms. Up to 4 x Bushranger Night Hawk VLI Series LED lights can be controlled by 1 wiring system and any combination of models/sizes can be used. The brightness control function allows the user to adjust the brightness of all lights on the system with 7 different light intensity settings giving complete control to match the driving conditions. In certain conditions, vision can be greatly enhanced by reducing the intensity of light projected, for example, dense bush tracks, hilly terrain or even some highway driving where an excess of light can lead to intense reflections and eye strain…. now you can dial these high intensity lights back to a more comfortable level. Use a second wiring system as a work/camping / reverse light setup and control the intensity of the lit area. You have complete control like never before. Plug & Play Connectors The wiring system uses control leads with waterproof plugs which quickly and easily join together to allow plenty of flexibility when routing from the control module to the VLI lights. Soft Start Programming The soft start feature programmed into the control module gradually increases the light intensity over the first second of operation to reduce eye strain and flash blindness that commonly occurs when switching into high beam mode with high intensity LED lights fitted. It also extends the life of the electronics by reducing the sudden shock load that occurs when high output LED’s change instantly from off to on. PWM Brightness Control The control module uses a Pulse Width Modulation (PWM) signal to control the brightness of all VLI series lights connected to the system. It allows the option of 7 x brightness settings which can be quickly changed at the turn of a dial to suit the conditions.

Bushranger® Night Hawk Protective Covers | Spot Beam Cover, clear. Genuine accessory. Suits Night Hawk 9″ VLI Driving Lights.

The Hi-Lift Mechanical Jack designed and engineered tough. A must have for any off-road adventurer, a simple tool designed to lift a trapped vehicle from a boggy situation. An ideal choice for extraction when a winch isn’t an option or you’ve had an electrical failure. It happens, and it’s nice to know you have options if it does. Variety of accessories available to suit including: Lift mate provides a list point from most wheels for quick and easy lifting. Base plate built to stop the Hi-Lift Jack sinking into soft terrain. Bumper lift kit is designed to fit most steel curved bumpers for a quick, easy lift. Fit it kit keeps your Hi-Lift Jack operating trouble-free. Includes principle parts for servicing all Hi-Lift Jack lifting units.